ULTRA SABERS LLC

 
HomeAbout UsNew ProductsStunt SabersUltraKidsDIY KitsPartsUltraFXBlade Polish
Learning Center
  Do-It-Yourself Kits (Only 1 color matched, non-functional Force Crystal included with each DIY kit)

Anakin ROTS Conversion Kit - $45

 
Everything you need to perform a Luxeon conversion to your Master Replicas Anakin Skywalker EP III Force FX lightsaber.
(Please read the long description for more information concerning this conversion kit)

Intermediate Conversion
  Electronics difficulty: 3 out of 5
Wire cutting, splicing
Soldering is suggested but not required
Mechanical difficulty: 3 out of 5
Removal of multiple fragile cosmetic components
Many small pieces to keep track of
Many steps to disassemble/reassemble the saber
 

Purchase

Please read description before ordering or emailing us!

 
 
This kit does not come with a new blade. If you want a new blade, you will need to purchase an UltraFX replacement blade.

This kit is for version 2 of the Master Replicas Anakin Skywalker EP III Force FX lightsaber (the heavier one with the real metal recharge pins). It is not compatible for use with version 1 (the lighter one with the plastic recharge pins). If in doubt, email us.

The kit has all you need, there is nothing else to buy. The Luxeon III led has been mounted and soldered in the custom aluminum Luxeon holder for you. You even get a brand new gold button to replace the stock copper one. You also get a blade retention bolt and hex key for it. A force crystal is provided and will match the LED color you choose.

This kit comes with highly detailed instructions created by a professional technical writer. The instructions are in full color with pictures at each step

The assembly of the Luxeon unit and soldering of the LED is done for you, the rest is rather easy to do with the provided instructions and steady hands. If you have wanted a Luxeon conversion performed, but wished to avoid the expense of sending in your saber and having us do it, this is the perfect solution for you.
Darth Vader ESB Conversion Kit - $45

 
Everything you need to perform a Luxeon conversion to your Master Replicas Darth Vader Force FX lightsaber.
(Please read the long description for more information concerning this conversion kit)

Intermediate/Advanced Conversion
  Electronics difficulty: 4 out of 5
Wire cutting, splicing
Switch removal required
Soldering is required
Mechanical difficulty: 4 out of 5
Removal of multiple fragile cosmetic components
Many small pieces to keep track of
Many steps to disassemble/reassemble the saber
Moderate to high risk of cosmetic damage
 

Purchase

Please read description before ordering or emailing us!

 
 
This kit does not come with a new blade. If you want a new blade, you will need to purchase an UltraFX replacement blade.

This kit is ONLY for the Master Replicas Darth Vader ESB Force FX lightsaber.

The kit has all you need, there is nothing else to buy. The Luxeon III led has been mounted and soldered in the custom aluminum Luxeon holder for you. You also get a blade retention bolt and hex key for it. A force crystal (for looks only) is provided and will match the LED color you choose.

This kit comes with highly detailed instructions created by a professional technical writer. The instructions are in full color with pictures at each step

The assembly of the Luxeon unit and soldering of the LED is done for you, the rest is rather easy to do with the provided instructions and steady hands. If you have wanted a Luxeon conversion performed, but wished to avoid the expense of sending in your saber and having us do it, this is the perfect solution for you.
 

Mace Windu Conversion Kit - $55

 
Everything you need to perform a Luxeon conversion to your Master Replicas Mace Windu Force FX Lightsaber.
(Please read the long description for more information concerning this conversion kit)

Advanced Conversion

  Electronics difficulty: 4 out of 5
Wire cutting, splicing
Soldering is required
Mechanical difficulty: 5 out of 5
Removal of fragile cosmetic components
Small pieces to keep track of
Many steps to disassemble/reassemble the saber
High risk of cosmetic damage
 

Purchase

Please read description before ordering or emailing us!

 
 
This kit does not come with a new blade. If you want a new blade, you will need to purchase an UltraFX replacement blade.

This kit is ONLY for the Master Replicas Mace Windu ROTS Force FX lightsaber.

The kit has all you need, there is nothing else to buy. The Luxeon III led has been mounted and soldered in the custom aluminum Luxeon holder for you. You also get a blade retention bolt and hex key for it. A force crystal (for looks only) is provided and will match the LED color you choose.

This kit comes with highly detailed instructions created by a professional technical writer. The instructions are in full color with pictures at each step

The assembly of the Luxeon unit and soldering of the LED is done for you, the rest is rather easy to do with the provided instructions and steady hands. If you have wanted a Luxeon conversion performed, but wished to avoid the expense of sending in your saber and having us do it, this is the perfect solution for you.

After this saber has been converted, the stock FX saber blade will fit HOWEVER it will have a bit of wobble to it as the blade holder has a slightly larger Inside Diameter than the stock FX emitter does!

Because of this issue we do suggest a new blade with your kit.

Anakin AOTC Conversion Kit - $65

 
Everything you need to convert your Master Replicas Force FX Darth Vader ESB into a Luxeon Anakin Skywalker AOTC lightsaber. (Please read the long description for more information concerning this conversion kit)

Intermediate/Advanced Conversion

  Electronics difficulty: 4 out of 5
Wire cutting, splicing
Switch removal required
Soldering is required
 
Mechanical difficulty: 4 out of 5
Removal of multiple fragile cosmetic components
Many small pieces to keep track of
Many steps to disassemble/reassemble the saber
Moderate to high risk of cosmetic damage
 
 

Purchase

Please read description before ordering or emailing us!

 
 
This kit does not come with a new blade. If you want a new blade, you will need to purchase an UltraFX replacement blade.

This kit is ONLY for the Master Replicas Darth Vader ESB Force FX lightsaber.

The kit has all you need, there is nothing else to buy. The Luxeon III led has been mounted and soldered in the custom aluminum Luxeon holder for you. You also get a blade retention bolt, hex key, force crystal (for looks only) and a polished aluminum emitter shroud to complete the transformation.

This kit comes with highly detailed instructions created by a professional technical writer. The instructions are in full color with pictures at each step

The assembly of the Luxeon unit and soldering of the LED is done for you, the rest is rather easy to do with the provided instructions and steady hands. If you have wanted a Luxeon conversion performed, but wished to avoid the expense of sending in your saber and having us do it, this is the perfect solution for you.

Luke Skywalker ROTJ Conversion Kit - $55

 
Everything you need to convert your Master Replicas Force FX Luke Skywalker ROTJ Lightsaber into a Luxeon Lightsaber. (Please read the long description for more information concerning this conversion kit)

Easy Conversion

  Electronics difficulty: 3 out of 5
Wire cutting, splicing
Switch removal required
Mechanical difficulty: 2 out of 5
Small pieces to keep track of
Small risk of cosmetic damage
 

Purchase

Please read description before ordering or emailing us!

 
This kit does not come with a new blade. If you want a new blade, you will need to purchase an UltraFX replacement blade.

This kit is ONLY for the Master Replicas Luke Skywalker ROTJ Force FX lightsaber.

The kit has all you need, there is nothing else to buy. The Luxeon III led has been mounted and soldered in the custom aluminum Luxeon holder for you. You also get a blade retention bolt and hex key for it. A force crystal (for looks only) is provided and will match the LED color you choose.

This kit comes with highly detailed instructions created by a professional technical writer. The instructions are in full color with pictures at each step

The assembly of the Luxeon unit and soldering of the LED is done for you, the rest is rather easy to do with the provided instructions and steady hands. If you have wanted a Luxeon conversion performed, but wished to avoid the expense of sending in your saber and having us do it, this is the perfect solution for you.

After this saber has been converted, the stock FX saber blade will fit HOWEVER it will have a bit of wobble to it as the blade holder has a slightly larger Inside Diameter than the stock FX emitter does!

Because of this issue we do suggest a new blade with your kit.