The Combat Lightsaber Specialists
Questions? Call 408.644.2910    //
Cart
(0) $0.00 View My Cart
Home > Limitless Sabers
Choose a Subcategory
Shop Lightsabers with the Diamond Driver Shop Lightsabers with the Emerald Driver

Ultra Sabers Limitless Lightsabers

Welcome to the future of custom lightsabers

Welcome to a new age of Saber technology. UltraSabers Limitless Sabers allow you complete control over every aspect of your saber's lights and sounds. The videos below will help you learn to master our Limitless Sabers, and help you decide if Diamond or Emerald is right for you. Please watch these videos carefully as they are packed with important information for the Driver and Controller.

Diamond Lightsabers

A Diamond Saber is an Ultrasaber that has been equipped with the most powerful and versatile lightsaber controller on the market for lightsabers, giving you the ultimate power to build a lightsaber with complete controller over its sound effects and blade colors.

Before you attempt to capture the power of a Diamond Saber it is critical that you educate yourself on it's capabilities first. Please watch the video below to begin your training.

What does the Diamond Controller allow you to do?

  • Synchronized sound and light effects which means you can have one light effect for your hum sound and a completely different light effect for your power on sound and a completely different light effect for your power down, swing, clash, spin, and stab sounds. Truly endless possibilities.
  • Advanced motion detection with adjustable sensitivity for: Swing, Clash, Spin, Stab, and Force.
  • Gesture recognition with the ability to learn new gestures from user through the on-board menu.
  • Hold & cycle through up to 10 soundfonts through the on-board menu without connecting to a computer with up to 15 effects per font (up to 16 sounds different sounds for Swing and Clash effects).
  • 256 MB internal memory (compared to 16MB found on our V4 soundboards).
  • 4-channel color mixer (Power LED) - gives you the ability to adjust the current on 4 individual channels that control 4 different colors (for example Red, Green, Blue, and White) and mix and match any of these adjusted channels to create almost limitless possibilities for different blade colors.
  • 4 additional independent low-power Accent LED channels which means you can add an illuminated AV switch without having it always on or sacrificing one of the main LED channels. And three additional Accent LEDs for DIY users.
  • 8 bit light intensity control on each channel, generating more than 16 million colors.
  • Gives you the ability to turn on/off a pulse mode so you can constantly pulse between two different custom colors
  • Gives you the ability to adjust the time and duration of the all light effects which means you can create an unlimited variety and combination of pulses, flickers, shimmer across every sound effect (not just flash on clash).
  • Gives you the ability to have a Flash on Clash of ANY COLOR with any main color blade. No more color blending during FoC and no more limitations on the combinations. Throw the FoC Chart in the garbage and expand to unlimited possibilities.
  • Battery monitor with 2 warning thresholds on any accent LED (for DIY users).
  • Accepts both LSU and WAV sound format (mono, 16 bit, 48 kHz)
  • Fully configurable firmware, upgradable through the Ultrasabers Launcher software.
  • Gives you the ability to make all these changes DYNAMICALLY, no DIP switch adjustments, no loading bar, no SD Card, no pin adjusting, no waiting. You click one button and you see your lightsaber blade change to the color of your choice right before your eyes.

Diamond Lightsabers Intro Video

Learn to harness the power of the Diamond Controller

Emerald Lightsabers

An Emerald Saber is an Ultrasaber that has been equipped with the most powerful and versatile LED driver on the market for lightsabers. Thus giving you the power to build a lightsaber of any color with a couple mouse clicks at any given time.

Before you harness the power of an Emerald Saber it is very important that you educate yourself on it's capabilities first. Please watch the videos below and prepare to have your mind blown by the versatility of these types of sabers.

What does the Emerald Driver allow you to do?

  • Gives you the ability to adjust the current on 4 individual channels that control 4 different colors (for example Red, Green, Blue, and White) and mix and match any of these adjusted channels to create almost limitless possibilities for different blade colors
  • Gives you the ability to turn on/off a pulse mode so you can constantly pulse between two different custom colors
  • Gives you the ability to adjust the time and duration of the pulse while in pulse mode
  • Gives you the ability to have a Flash on Clash of ANY COLOR with any main color blade. No more color blending during FoC and no more limitations on the combinations. Throw the FoC Chart in the garbage and expand to unlimited possibilities (Available on Sabers with Sound only)
  • Gives you the ability to change the time and duration of your Flash on Clash (Available on Sabers with Sound only)
  • Gives you the ability to adjust the number of times your saber flashes on clash (Available on Sabers with Sound only)
  • Gives you the ability to make all these changes DYNAMICALLY, no DIP switch adjustments, no loading bar, no SD Card, no pin adjusting, no waiting. You click one button and you see your lightsaber blade change to the color of your choice right before your eyes.

Emerald Sabers Intro Video

Learn to master the Emerald Driver

 
 
(0) $0.00 View My Cart
Desktop View Mobile View